Skip to content
Every blade is made to order and welded to your length. Your basket shows the expected delivery date before you pay.
The Bandsaw Store

Material guide

Bandsaw blades for mild steel

Mild steel does not need an exotic edge: a bi-metal blade with an HSS tooth line on a flexible alloy backing handles it all day. The real decision is pitch, matched to your section size and wall thickness.

Shop bi-metal bladesFind my blade

The problem with cutting mild steel

Mild steel is the bread and butter of every fabrication saw, which is exactly why it gets taken for granted. It is not especially hard, it does not work harden the way stainless does and it asks nothing unusual of the tooth material. Almost every failure on mild steel traces back to pitch: a tooth count that does not match the section on the table.

Run a coarse blade into thin-walled tube and too few teeth carry the load; teeth catch the wall, hook and strip. Run a fine blade into solid bar and the gullets fill before they clear the cut, so swarf packs between the teeth, the blade rubs instead of cutting and heat does the damage the material never could. Box sections and angle add interrupted cuts, hammering each tooth as it enters and leaves the wall.

The right edge for mild steel is a bi-metal band: a high speed steel tooth line welded to a flexible alloy backing. The HSS edge stays hard at cutting temperature while the backing flexes around the wheels without cracking. Match the pitch to section size and wall thickness and a good bi-metal blade does the rest.

Recommended blades for mild steel

Blades on sale today that suit this material, with the reason from each listing. Every one is welded to your machine's length.

Recommended blades for mild steel, from the current range. Prices are the lowest price offered for each blade.
BladeConstructionWidth rangeWhy this bladePrice
3853 Sandflex Top Fabricator PF Bandsaw BladeBahcoHSS tooth edge welded to a flexible alloy steel backingBi-metal blades guide34mm to 67mmStructural steel bi-metal blade for tubes, profiles and mitre cutting in fabrication shops.From £15.77 ex VAT£18.92 inc VAT
Production M42 Bandsaw BladeMorseHSS tooth edge welded to a flexible alloy steel backingBi-metal blades guide13mm to 27mmM42 cobalt HSS bi-metal blade for higher production speeds and heat resistance on alloy and stainless steels.From £8.43 ex VAT£10.12 inc VAT
3851 Sandflex Cobra PRX Bandsaw BladeBahcoHSS tooth edge welded to a flexible alloy steel backingBi-metal blades guide27mm to 67mmProduction bi-metal blade with an improved HSS tooth edge for high performance metal cutting.From £13.12 ex VAT£15.74 inc VAT
3857 Easy-Cut EZ Bandsaw BladeBahcoHSS tooth edge welded to a flexible alloy steel backingBi-metal blades guide13mm to 34mmMultipurpose Easy-Cut bi-metal blade for tool rooms, fabricating and welding shops.From £11.79 ex VAT£14.15 inc VAT
Challenger Bandsaw BladeMorseHSS tooth edge welded to a flexible alloy steel backingBi-metal blades guide27mm to 54mmStructural bi-metal blade for interrupted and bundle cutting of I-beams, tube and channel.From £13.21 ex VAT£15.85 inc VAT
Maverick Bandsaw BladeMorseHSS tooth edge welded to a flexible alloy steel backingBi-metal blades guide27mm to 54mmProduction and job-shop bi-metal blade for tool steels, stainless, structural shapes and tough alloys.From £13.17 ex VAT£15.80 inc VAT

Getting the cut right

General rules that hold across machines. Exact widths, pitches and options are on each product page.

  1. Match pitch to the section

    Pitch is the decision that matters in mild steel. Solid bar wants a coarser tooth with gullets big enough to carry the chip through the full cut. Thin wall tube wants a finer pitch so enough teeth share the load. Judge the blade by the material thickness the teeth actually pass through, not the overall size of the workpiece.

  2. Break the blade in gently

    A new bi-metal blade has razor-sharp tooth tips that chip if you bury them at full feed straight away. Ease the feed for the first few cuts so the tips wear to a stable edge, then bring the pressure up. A blade broken in properly outlasts one hammered from its first cut.

  3. Read the swarf

    The chip tells you whether feed and speed are right. Tightly curled chips with a consistent colour mean the teeth are cutting cleanly. Thin powdery swarf means the blade is rubbing: increase the feed. Heavy blued chips mean you are forcing the cut or running too fast: back off before the edge burns.

  4. Set the machine up properly

    Tension the band to the machine maker's setting, bring the guides as close to the work as the cut allows and clamp sections so they cannot rotate. Position box and angle so the teeth enter the wall at an angle rather than slamming into a flat face. A running wire brush keeps the gullets clear.

A horizontal bandsaw cutting through a steel I beam held in the vice on a roller table, with coolant running over the cut, curled steel swarf falling and an overhead crane in the workshop behind

Industry guide

Structural Steel, Fabrication and General Engineering

Cutting mild steel for a living? The industry guide maps the whole workload, not just this material.

Read the guide

Other material guides

From the blog

Frequently asked questions

What blade do I need for mild steel box section and tube?

A bi-metal blade with a pitch fine enough to keep several teeth in the wall at once. Box and angle produce interrupted cuts, so the tooth edge takes repeated impacts as it enters and leaves each face. Blades built for fabrication work, such as the Bahco Sandflex Top Fabricator, are designed to handle exactly this without stripping teeth.

Can one bandsaw blade cut mild steel and stainless steel?

Yes. Bi-metal blades cut materials from aluminium through to stainless steels, so a general purpose band covers mixed work without a blade change. If you cut mostly one material, choose the pitch for that job; a blade matched to the section will usually outperform a compromise.

What blade should I buy first for a workshop cutting mild steel?

A general purpose bi-metal blade is the sensible first band for mixed mild steel work: it handles solids, bundles, profiles and castings on workshop saws. Once you know what you cut most, add a second blade with the pitch matched to that work and swap between them.

Tell the blade wizard your machine and length and it will narrow the range for mild steel.

Find my blade